Kitchenaid Oven Won’t Heat Past 260

KitchenAid oven won’t heat past 260 now; what kind of devious thing is this? I know it is heart-wrenching because of not having the proper temperature. You won’t be able to bake or even cook anything properly.

But don’t be afraid, we will help solve this problem. This heating problem is due to the oven’s temperature being changed to Celsius rather than Fahrenheit. 

To fix it, you need to change it back to Fahrenheit. And to do so, open the oven door and hold the broil button until you hear the beep sound. And it will go back to Fahrenheit. There are also different ways to fix your oven heat problem. To know about them stay with us.

Kitchenaid Oven Won't Heat Past 260

Reason Why KitchenAid Oven Won’t Heat Past 260

Temperature Sensor

The temperature sensor of your oven works with the thermostat to control the oven’s temperature. So by any chance, if it is flawed, then it will not create the resistance it starts when the temperature rises while operating through electricity. 

Before you think of checking the temperature sensor, make sure that it is not touching the interior wall of the oven, as it may give wrong readings while you are reviewing. 

Once you are done assessing, get the sensor fixed or replaced. Or, at times, if the sensor’s position is misplaced, then putting it in the correct can position can also work.

Baking Element

The ovens are heated through a metal coil located at the base of the oven. When the electricity passes through the wires in the coil, it warms up and gets the oven ready for you to cook or bake.

So by any chance, if the baking element is damaged, then you won’t get the desired temperature. 

Now how to understand whether it is working or not. If it is working, you will see a constant red glow when the oven is on. 

But if it is damaged, you will be able to see blisters around; other than that, the red glow it usually shows will be less or not at all. 

And lastly, to be sure, you can get your baking element checked by the multimeter. If it shows a negative sign, get it replaced. 

Igniter

Igniter of your oven has two work First is to draw electricity through the oven safety valve to open, and second, it must get hot enough so that it starts glowing and erupts the gas of the oven. Now it can be said our igniter does quite a lot of work.

But if our hero here fails, it will take time to open the safety valve and hence the oven will not heat up. Now, to understand whether your igniter breaks down, you need to do a few things.

First, you need to observe the igniter when the oven is operating. If you see that the igniter is glowing for more than 90 seconds without lightening up the gas flame, it is fragile to open the safety valve. So without further delay, get it replaced.

Convention Fan Motor

If you are using convection over, you must know that they use the convection fan motor to circulate hot air so that the food cooked in the oven becomes faster and more evenly. 

But if it is defective, then it won’t be able to circulate the most needed hot air affecting the heating of the oven while cooking. 

To identify if the convection fan motor is defective or not, you can test it by multimeter and check its continuity, or you use your hands to move the fan’s blades. 

But if you see that there is no continuity or you cannot move the fan’s blades with your hands, then it is clear that it is defective. You immediately need to replace it or get professional help. 

Thermal Fuse

The work of the thermal fuse is to completely shut down the power off the oven if it gets overheated. So if the thermal fuse is not working, your oven will not get heated. 

Although the chances of the thermal fuse being busted are not expected, to check whether it is broken or not, you can use the multimeter to check its continuity. And if you see that it is not working, get it replaced. 

Control Board

According to the user settings, the oven’s control board has relays that send voltage to the baking and the broiler in the oven. 

So if the control board is not working correctly, it won’t be able to send the required voltage to the heating components. 

But before drawing any conclusion, make sure to check all the heating components to see if they are working correctly or not. 

Once you assure that they are working correctly, replace the control board as there is no easy way to test the control board of the oven.

Power Problem

As much as all the other elements of the oven are essential, the essential thing to check is that the oven is getting the correct amount of voltage power to operate. 

So if your oven is not heating up, check the power source with the multimeter to see if it receives the correct power voltage. 

Wire Connection

Usually, when solving problems, we all look for the more prominent components. Sometimes the little nitty-gritty things are the cause of the problem which we avoid. 

Like the wire connections that supply power to the igniter or oven element can be burned, check the wire connected to the igniter if they are burned. It is effortless to spot because the burning is very visible.

Relay Board

You will find relay boards in most of the ovens. It has many relays which control the electrical flow to the heating components of your oven. 

If any of them fails, then the oven will not be heated, so get it replaced when you are sure that any of them are not working correctly. 

Pressure Regulator and Valve

Maybe they have somehow defected, but very rarely does it happen. So before putting our brains into finding faults in them or thinking of replacing them. 

It is essential to check the other important and common components that can easily be defected.

Leave a Comment

Your email address will not be published.